Replies: 39
| visibility 201
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
Any of y'all engineerin' types do any maintenance engineering?
3
Jan 9, 2024, 1:09 PM
|
|
ryanadidas® Isn't that what you do?
I need some wreck-omendations on high performance paint for corrosive environments.
Inb4 "rustoleum".
|
|
|
|
Oculus Spirit [85559]
TigerPulse: 100%
Posts: 24981
Joined: 5/21/14
|
We paint equipment in the pacific
3
Jan 9, 2024, 1:18 PM
|
|
I don't know what they use though.
|
|
|
|
|
Heisman Winner [136429]
TigerPulse: 100%
Posts: 41750
Joined: 8/26/07
|
Re: Any of y'all engineerin' types do any maintenance engineering?
2
Jan 9, 2024, 1:25 PM
|
|
Stockholm Tar
Worked fine for 100s of years.
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
I should have specified this is for wood
2
Jan 9, 2024, 1:28 PM
|
|
But pine tar is an interesting idea. I've heard of fuel tanks being coated in it.
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
*ISN'T for wood..it's for cast iron.***
2
Jan 9, 2024, 1:29 PM
|
|
|
|
|
|
|
Heisman Winner [136429]
TigerPulse: 100%
Posts: 41750
Joined: 8/26/07
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
Plasti dip seems like it would be worse than undercoating material
2
Jan 9, 2024, 1:40 PM
|
|
It'll just trap moisture underneath it.
|
|
|
|
|
Heisman Winner [136429]
TigerPulse: 100%
Posts: 41750
Joined: 8/26/07
|
heat it to a dull red then stick in vermiculite until cool
1
Jan 9, 2024, 1:46 PM
|
|
coat right away.
zero moisture
|
|
|
|
|
Oculus Spirit [85559]
TigerPulse: 100%
Posts: 24981
Joined: 5/21/14
|
Here is some other stuff we used in corrosive environments
1
Jan 9, 2024, 1:31 PM
[ in reply to *ISN'T for wood..it's for cast iron.*** ] |
|
1 12 EA Boysen Lacquer Thinner PHP 533.50 PHP 6,402.00 2 8 EA BoySen Lacquer Primer PHP 931.50 PHP 7,452.00 3 2 EA Boysen Black Lacquer PHP 912.50 PHP 1,825.00 4 8 EA Boysen Curing Agent PHP 956.50 PHP 7,652.00 5 10 EA Paint roller PHP 48.00 PHP 480.00
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
Intredasting.
2
Jan 9, 2024, 1:58 PM
|
|
Lacquer is usually used for "A" quality surfaces..like car fenders and hoods.
I don't care what the finish of this looks like.
|
|
|
|
|
Oculus Spirit [85559]
TigerPulse: 100%
Posts: 24981
Joined: 5/21/14
|
|
|
|
|
Legend [17351]
TigerPulse: 100%
Posts: 14290
Joined: 12/14/98
|
Boeing is now using Flex Seal tape on door plugs***
2
Jan 9, 2024, 1:46 PM
|
|
|
|
|
|
|
All-In [40953]
TigerPulse: 100%
Posts: 42965
Joined: 11/30/98
|
epoxy***
2
Jan 9, 2024, 1:32 PM
|
|
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
|
|
|
|
All-In [26552]
TigerPulse: 100%
Posts: 20695
Joined: 9/2/02
|
Ask Sherwin Williams
3
Jan 9, 2024, 1:32 PM
|
|
He's a regular on the main bored.
|
|
|
|
|
All-In [47835]
TigerPulse: 100%
Posts: 44540
Joined: 9/5/02
|
not an answer to your question but
4
Jan 9, 2024, 1:36 PM
|
|
this stuff - Rust Patrol - is great for marine and highly corrosive environments at preventing rust / corrosion.
https://rustpatrol.com/
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
This seems like a pretty good preventative treatment.
1
Jan 9, 2024, 1:56 PM
|
|
Have you used this stuff with success?
I have some other stuff I could use it on as well.
|
|
|
|
|
All-In [47835]
TigerPulse: 100%
Posts: 44540
Joined: 9/5/02
|
I have. I have also litigated the
1
Jan 9, 2024, 6:35 PM
|
|
*secret* trade secret formula
seriously, its good stuff. I've also used it on seized bolts
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
I'll pick up some to check it out***
Jan 9, 2024, 7:17 PM
|
|
|
|
|
|
|
Legend [17351]
TigerPulse: 100%
Posts: 14290
Joined: 12/14/98
|
Replace with 316L stainless
2
Jan 9, 2024, 1:37 PM
|
|
Seriously need to know what material such as carbon steel, concrete, other etc., in what service/ environment and new or repainting (especially for prepping).
Best to engage a commercial or industrial paint provider and a professional contractor.
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
THAT would be expensive.
2
Jan 9, 2024, 1:55 PM
|
|
The part I'm waging war on is the cast iron torsion arm in this picture that are the axles of my boat trailer:
They are painted from the factory (NOT galvanized..I have no idea why), so after a few years in saltwater the rust is pretty substantial. Last year I removed the disk brakes, took a chipping hammer to the torsion arms, knocked off the iron delamination, wire brushed them, treated them with Ospho rust treatment, then painted them with silver Rustoleum.
It took about two dips in salt water for the rust to return. I'm going to do that process ONE more time. I will probably need new axles in around 3-5 years as the the rubber in the torsion bars is wearing out, but I don't want the rest of it to rust away before then. And I want to find something reliable to treat the next set of torsion arms prior to installation next time, too.
|
|
|
|
|
All-TigerNet [11239]
TigerPulse: 100%
Posts: 14074
Joined: 9/2/03
|
PTFE or Zinc***
Jan 9, 2024, 2:31 PM
|
|
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
Getting real zinc paint is almost impossible now.
Jan 9, 2024, 2:38 PM
|
|
If I had some navy yard connections, I'd get some real zinc chromate primer/paint, but everything that's sold publicly is crap now.
I'm not sure PTFE would help, or how I'd apply it to stay on.
|
|
|
|
|
All-TigerNet [11239]
TigerPulse: 100%
Posts: 14074
Joined: 9/2/03
|
Zinc paints out there would work. Probably be something
Jan 9, 2024, 3:03 PM
|
|
to reapply once a season. PTFE paints/coatings will dry and cure. Cajun folk down here use this chit called Gator glide on jonboats and fan boats. Hard coating that goes on the hull. If it ain’t getting wet, it ain’t corroding.
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
The foul release seems promising , nut it doesn't adevrtise as being corrosion
Jan 9, 2024, 3:08 PM
|
|
resistant.It looks like another version of a Propspeed product.
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
"nut"..lol. Thats foul releasing too.
Jan 9, 2024, 3:11 PM
|
|
I meant BUT
|
|
|
|
|
Orange Blooded [2695]
TigerPulse: 97%
Posts: 3414
Joined: 7/3/07
|
Boeshield T-9***
Jan 9, 2024, 2:17 PM
|
|
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
Its too late for Boeshield.
Jan 9, 2024, 2:36 PM
|
|
Had that been done originally, it might work.
|
|
|
|
|
Lot o points [156098]
TigerPulse: 100%
Posts: 65916
Joined: 5/6/13
|
Waxoyl***
1
Jan 9, 2024, 7:31 PM
|
|
|
|
|
|
|
Lot o points [156098]
TigerPulse: 100%
Posts: 65916
Joined: 5/6/13
|
Re: Waxoyl***
2
Jan 10, 2024, 8:25 AM
|
|
Ineligible user not sure if you saw this yesterday, but was a serious suggestion.
|
|
|
|
|
Oculus Spirit [85559]
TigerPulse: 100%
Posts: 24981
Joined: 5/21/14
|
Re: Waxoff******
2
Jan 10, 2024, 8:28 AM
|
|
|
|
|
|
|
Lot o points [156098]
TigerPulse: 100%
Posts: 65916
Joined: 5/6/13
|
Lap***
1
Jan 10, 2024, 9:04 AM
|
|
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
Didn't see this, but yeah, thats worth a look
Jan 10, 2024, 9:09 AM
[ in reply to Waxoyl*** ] |
|
Kinda like fluid film, Boeshield, or anything of that nature--seems that would work well if it wasn't already rusted. I need to cut off any access to oxygen to keep it from rusting again.
I could put this on after I paint it though.
|
|
|
|
|
Lot o points [156098]
TigerPulse: 100%
Posts: 65916
Joined: 5/6/13
|
I'd hit it with POR-15 and then Waxoyl it.***
Jan 10, 2024, 10:46 AM
|
|
|
|
|
|
|
Lot o points [156098]
TigerPulse: 100%
Posts: 65916
Joined: 5/6/13
|
One other similar suggestion
Jan 10, 2024, 10:54 AM
|
|
You're probably familiar with Cosmoline.....the stuff they put on the engine of just about every car that will make a trans-ocean journey post-production. Stuff works and is dammm near impossible to get off.
https://www.cosmolinedirect.com
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
I think cosmoline, waxoyl, fluid film, boeshield, Lanocote are all similar
Jan 10, 2024, 11:25 AM
|
|
products, but just from the brief reading I did on the waxoyl that seems to be a better product because it dries harder. But like the other products I listed, I'm just not sure how much it seals from the air like a paint would.
When someone above reminded me of the pine tar I thought of using that, but that stuff is a mess..and it literally takes years for it to dry. It's used pretty extensively on below deck fuel tanks to keep them from corroding out. Which is a good application for that product, because nothing touches it, and it doesn't move, and is semi covered.
Cosmoline isn't one I had originally thought off (although I am familiar with it), but I'm concerned with its abrasion resistance. Best case I would do this job once, although I guess small touch up wouldn't be terrible. It's another that I think would do better on a nonrusted surface, but I could be wrong. Have you ever used to on something that you just wanted to keep "status quo"? Like "yeah its rusted a little now, but if it stays like that its okay?"
The pic below isn't mine, but it's not far from what I started with. Pretty heavy steel delamination; I gave up on a wire wheel and literally bought a welding slag hammer to chip off the delamination, then wire brushed what was left. The Ospho I used to treat the rust didn't do squat, as I had rust bleed through the two coats of rust oleum paint pretty quickly, so I'm not sure which product sucked more.
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
POR-15 was my first thought.
Jan 10, 2024, 11:05 AM
[ in reply to I'd hit it with POR-15 and then Waxoyl it.*** ] |
|
I've used it before, and had decent results I guess; I mean it didn't rust in the ~3 years after that I owned it. But it was only on a gas tank skid plate on a Jeep Grand Wagoneer. I never dunked it in salt water.
But then I saw this video, and POR didn't perform well at all. I was surprised. The problem with these axles is that whatever I put on there needs to seal the air out to keep rust from returning, but also needs to be abrasion resistant from road debris, deal with sand hitting it at highways speeds, weeds scraping it off etc. just due to being on the underside of a trailer.
Anyway, the Mastercoat performed well in the test in the video; I have ordered some and will give that a try. The real test is what I put on the new set of axles that I get in the next few years. Jacking up the trailer, removing the wheels, brakes, and hubs is a real PIA.
https://www.youtube.com/watch?v=TABWPHutk-A
|
|
|
|
|
All-In [46871]
TigerPulse: 100%
Posts: 30767
Joined: 8/11/15
|
I got you fam
1
Jan 10, 2024, 8:33 AM
|
|
|
|
|
|
|
CU Medallion [64837]
TigerPulse: 100%
Posts: 22718
Joined: 9/27/04
|
sorry for just now getting this... but I think the guys covered it.***
2
Jan 10, 2024, 10:49 AM
|
|
|
|
|
|
|
Oculus Spirit [81249]
TigerPulse: 100%
Posts: 56283
Joined: 9/13/04
|
I specifically tagged you because I was wondering if there is a
Jan 10, 2024, 11:34 AM
|
|
high performance, industrial type available coating that you might have experience with.
Back when I was in high school, my father had responsibilities for the maintenance departments at a few manufacturing plants. On anything that was seeing corrosive environments, he always had some kind of coating or paint that worked better than anything you could buy at hardware store. But then again, that was when "red lead" paint was made from lead based paint, and Zinc Chromate primer was actually made of zinc, and it actually worked.
I'll probably get cancer from all of it one day.
|
|
|
|
Replies: 39
| visibility 201
|
|
|